Kia Sorento: Room Lamp Installation - Lighting System - Body Electrical System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Room Lamp Installation

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / Lighting System / Room Lamp Installation

1.
Install the room lamp assembly after connecting the lamp connector.
2.
Install the lamp lens after assembling the bulb.
Room Lamp Removal
[General] 1. Disconnect the negative (-) battery terminal. 2. Detach the lamp lens (A) from the room lamp with a flat-tip screwdriver t ...

Overhead Console Lamp Inspection
Remove the overhead console lamp assembly then check for continuity between terminals. If the continuity is not as specified, replace the map lamp switch. ...

See also:

Auto Defogging Actuator Inspection
1. Turn the ignition switch OFF. 2. Disconnect the auto defogging connector. 3. Verify that the auto defoggin ...

Blind Spot Detection Switch Circuit Diagram
...

Front Body E
* These dimensions indicated in this figure are actual-measurement dimensions. [ Unit : mm (inch) ] Hood hinge m ...

Copyright www.ksmanual.com 2014-2026