Kia Sorento: Wiper Motor Repair Procedures - Wiper/Washer - Body Electrical SystemKia Sorento: Wiper Motor Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body Electrical System / Wiper/Washer / Wiper Motor Repair Procedures

Removal
Front Wiper Motor
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the cowl top cover.
(Refer to Body - "Cowl Top Cover")
3.
Remove the wiper motor and linkage assembly (A) after removing the bolts.

Tightening torque :
6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)

Body Electrical System — Wiper/Washer / Wiper Motor / Repair Procedures / Removal illustration

4.
Disconnect the wiper motor connector (A).

Body Electrical System — Wiper/Washer / Wiper Motor / Repair Procedures / Removal illustration

Rear Wiper Motor
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the rear wiper arm.
(Refer to Wiper/Washer - "Wiper Arm")
3.
Remove the rear wiper motor grommet (A).

Body Electrical System — Wiper/Washer / Wiper Motor / Repair Procedures / Removal illustration

4.
Disconnect the wiper motor connector (A).

Body Electrical System — Wiper/Washer / Wiper Motor / Repair Procedures / Removal illustration

5.
Remove the rear wiper motor and link assembly (A) after removing the bolts.

Tightening torque :
6.9 - 10.8 N·m (0.7 - 1.1 kgf·m, 5.1 - 8.0 lb·ft)

Body Electrical System — Wiper/Washer / Wiper Motor / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
Wiper Arm Repair Procedures
Removal Front Wiper Arm ...
Heating,Ventilation And Air Conditioning
...
See also:

Schematic Diagrams. DC DC converter Specifications
Schematic Diagrams System block diagram DC DC converter Specifications Specification Item Specificat ...

Description
Ignition timing is controlled by the electronic control ignition timing system. The standard reference ignition timing data for the engine operating conditions are pre-pro grammed in the ...

Paddle Shifter Switch Repair procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the drive ...

Copyright © www.ksmanual.com 2014-2026 - 0.0452