Kia Sorento: Wide Angle Camera On Vehicle Inspection
Visual Inspection
If the function of RVM, SVM, PCA, or RSPA is not operable or DTC occurs, check the following below.
| 1. |
Check the cleanliness of the wide angle camera mounting location.
|
•
|
If the wide angle camera lens is contaminated with snow, dust, or stickers, the performance may
deteriorate.
|
|
•
|
If the wide angle camera lens glass is damaged, the performance may deteriorate.
|
|
| 2. |
Check the condition around the wide angle camera
|
•
|
If a door or trunk (tailgate) equipped with a wide angle camera is opened, an abnormal screen may
be displayed.
|
|
| 3. |
Check the shape and condition of the wide angle camera mounting location
|
•
|
If the vehicle is tilted due to cargo loading, etc. the accuracy of parking guidelines and SVM top
view may be reduced.
|
|
•
|
If moisture enters the wide angle camera lens, performance may deteriorate.
|
|
| 4. |
Check the wide angle camera and ADAS parking ECU in case of a trouble code.
|
•
|
Check for damage to the wide angle camera, ADAS parking ECU and integrated monitor.
|
|
•
|
SVM : Check connection status to the wide angle camera, ADAS parking ECU connector and wiring.
|
|
•
|
RVM Check connection status to the wide angle camera, integrated monitor connector and wiring.
|
|
| 5. |
Check the button operation
|
•
|
For RVM/SVM specification, press the parking view button (A) below 1 second to check RVM/SVM screen
is properly displayed.
|
|
•
|
For RSPA specification, press the parking view button (A) 1 second or above to confirm RSPA
operating status.
|
|
Check for poor picture image quality of wide angle camera
Symptom
|
Suspected Cause
|
Dirty lens
|
Damaged lens
|
Airtightness failure
|
|
Blurry and display quality trouble
|
Exterior stain
|
Lens coating peeled
|
Inflow of water in lens
|
Countermeasure
|
Clean the exterior of wide angle camera
|
Replace the wide angle camera
|
Replace the wide angle camera
|
Symptom
|
Suspected Cause
|
Dirty lens
|
Damaged lens
|
Airtightness failure
|
|
Any object or line on monitor
|
Exterior stain
|
Lens crack
|
Crack and inflow of water
|
Countermeasure
|
Clean the exterior of wide angle camera
|
Replace the wide angle camera
|
Replace the wide angle camera
|
|
•
|
Check whether the vehicle is equipped with a genuine wide angle camera or not.
|
|
–
|
If the vehicle is not equipped with a genuine wide angle camera, it will result in low-quality
images or malfunction.
|
|
•
|
Warranty repair is not available for the replacement of the wide angle camera in case of
malfunction due to negligence in use (cleaning with detergent, impact from foreign substances) or
non-genuine installation.
|
|
•
|
Be sure to clean it with water or a clean cloth when cleaning the exterior of the wide-angle camera
lens.
|
|
•
|
Check whether the same defect occurs after checking the surface condition of the wide-angle camera
lens and removing foreign substances.
|
|
•
|
The coating of the wide angle camera lens may be peeled off when washing the car with a strong acid
cleaner.
|
|
•
|
The wide angle camera lens can be damaged by objects such as stones flying from outside while
driving.
|
|
Diagnostic with KDS
| 1. |
The wide angle camera can be more quickly diagnosed for problems with the KDS. (Refer to "DTC
guide")
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
| (2)
|
S/W Management : Controlling other features including system option setting and zero point
adjustment.
(S/W Management → Advanced Driver Assistance System_Parking → System Identification)
(S/W Management → Advanced Driver Assistance System_Parking → SVM Calibration Mode)
(S/W Management → Advanced Driver Assistance System_Parking → SVM - Calibration Mode)
(S/W Management → Advanced Driver Assistance System_Parking → SVM Self-calibration mode)
|
|
Refer to the KDS screen for operating conditions and details
|
|
Description and Operation
Item
Name
Function
Driving Safety
BVM(Blind-Spot View Monitor)
Whe...
See also:
Specifications
Direct control VFS[LINE Pressure]
▷ Control type : Normal high type
Control Pressure kpa
(kgf/cm², psi)
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0)
Current va ...
CVVT (Continuously Variable Valve Timing) System Description
Continuous Variable Valve Timing (CVVT) system advances or retards the
valve timing of the intake and exhaust valve in accordance with the ECM control
signal which is calculated by the engine ...
Ambient Temperature Sensor Replacement
1.
Disconnect the negative (-) battery terminal.
2.
Remove the front bumper.
(Refer to Body - "Front Bumper")
...
Wide Angle Camera Description and Operation
Wide Angle Camera Removal and Installation
