Detach the speed restriction label from the sealant bottle, and place it in a highly visible place inside your Kia Sorento, such as on the steering wheel, to remind the driver not to drive too fast.
Vigorously shake the sealant bottle to ensure proper mixture of the compounds before application.
Remove the protective cap of the sealant bottle and securely screw the connection hose onto the connector of the sealant bottle.
Ensure that the pressure-reducing valve on the compressor is completely locked.
Unscrew the valve cap from the valve of the defective tire and firmly screw the filling hose of the sealant bottle directly onto the tire valve.
Ensure that the compressor power switch is turned completely off, set to position 0.
Connect the compressor to the vehicle power outlet using the integrated power cable and connectors.
Turn the vehicle power on by placing the ENGINE START/STOP button or ignition switch in the ON position.
Switch on the compressor and let it run for approximately 5–7 minutes to fill the sealant up to proper pressure (refer to Tires and wheels). The inflation pressure of the tire after filling is unimportant and will be checked/corrected later. Be careful not to overinflate the tire and stay away from the tire when filling it. When the tire and wheel are damaged, do not use Tire Mobility Kit for your safety.
Switch off the compressor.
Detach the sealant filling hoses from the sealant bottle connector and from the tire valve. After using, leave the sealant bottle and the compressor attached together. Return the TMK to its storage location in the vehicle.
CAUTION
Securely install the sealant filling hose on the valve. If not, sealant may flow backward, possibly clogging the filling hose.
WARNING
If the tire pressure is below 29 psi (200 kPa), do not drive the vehicle. It may cause accident.
Return the TMK to its storage location in your Kia Sorento.
WARNING
Carbon monoxide
Do not leave your vehicle running in a poorly ventilated area for extended periods of time. Carbon monoxide poisoning and suffocation can occur.
Connectors, cable and connection hose are stored in the compressor housing.
Connectors, cable and connection hose are stored in the compressor housing.
Strictly follow the specified sequen ...
After putting sealant in the tire, it is necessary to drive your Kia Sorento so that the sealant becomes evenly distributed inside the tire structure.
...
See also:
Driver position memory system (if equipped, for power seat)
A driver position memory system is provided to store and recall the driver seat
and outside rearview mirror position with a simple button operation.
By saving the desired position into the system ...
Kia Digital Key 2 Smartphone Integration
By pairing your smartphone to the Kia Sorento via the Kia Access application, your mobile device becomes a fully
secure digital key capable of proximity unlocking, remote tailgate access, and eng ...
Speakers Installation
Front speaker
1.
Install the speaker to the speaker mounting hole in the door in-panel.
2.
Reconnect the speaker connector.
Rea ...
Kia Sorento: Using the Tire Mobility Kit
Components of the Tire Mobility Kit
Distributing the sealant