Kia Sorento: Distributing the sealant
After putting sealant in the tire, it is necessary to drive your Kia Sorento so that the sealant becomes evenly distributed inside the tire structure.
|
-
Immediately drive approximately 4–6 miles (7–10 km or, about 10 minutes) to evenly distribute the sealant in the tire.
Do not exceed a speed of 50 mph (80 km/h). If possible, do not drop below 12 mph (20 km/h).
While driving, if you experience any unusual vibration, ride disturbance or noise, reduce your speed further and drive with caution until you can safely pull off of the side of the road.
CAUTION
When you use the TMK, the tire pressure sensors and wheel may be stained by sealant. Remove the tire pressure sensors and wheel stained by the sealant and have your vehicle inspected by an authorized Kia dealer.
Using the Tire Mobility Kit
CAUTION
Detach the speed restriction label from the sealant bottle, and place it in a highly visible place inside your Kia Sorento, such as on the steering wheel, to remind the driver not t ...
Checking the tire inflation pressure
After driving briefly so as to distribute the sealant in the tire, check the inflation pressure.
After driving approximately 4–6 miles (7–10 km or about 10 minutes), stop ...
See also:
External Amplifier Installation
External Amplifier
1.
Install the external amplifier after connecting the connector.
2.
Install the passenger seat assembly.
...
Front Disc Brake Installation
1.
Installation is the reverse of removal.
2.
Compress the piston into the caliper body using the SST (09581-11000).
...
Operating conditions
The ISG system on your Kia Sorento functions only when a strict set of environmental and mechanical parameters are
met:
The driver's safety seat belt is securely fastened.
...