Kia Sorento: Turn and lane change signal operation. One-touch lane change function
|
The ENGINE START/STOP button must be ON for the turn signals to function.
- To engage the turn signal, move the lever up or down (1).
The green arrow indicators on the instrument panel indicate which turn signal is operating.
The turn signal will cancel itself after you complete a turn. If the indicator continues to flash after a turn, manually return the lever to the OFF position.
- To signal a lane change, move the turn signal lever slightly and hold it in position (2).
The lever will return to the OFF position when released.
If an indicator stays on and does not flash, or if it flashes abnormally, one of the turn signal bulbs may be burned out and need to be replaced.
One-touch lane change function
To use the one-touch lane change function, move the turn signal lever slightly, then release it. The lane change signals will blink 3, 5, or 7 times.
You can activate or deactivate the one-touch lane change function or choose the length of blinking (3, 5, or 7 times) by selecting User Settings > Lights > One Touch Turn Signal.
NOTE
If an indicator flash is abnormally quick or slow, a bulb may have a poor electrical connection in the circuit, or it may be burned out and need to be replaced.
High beam operation
To turn on the high beam headlights, push ...
See also:
Windows
(1) Driver’s door power window switch
(2) Front passenger’s door power window switch
(3) Rear door (left) power window switch
(4) Rear door (right) power window switch
(5) Window opening and ...
Fuel Filler Door Open Switch Inspection
1.
Remove the front door trim panel.
(Refer to Body - "Front door")
2.
Disconnect the switch connector (A) from wiring.
...
Climate control air filter
The cabin climate control air filter removes microscopic dust, pollen, and other pollutants that enter your Kia
Sorento from the outside environment. If dust or other pollutants accumulate in the ...