Kia Optima Manuals

Kia Sorento: Tire Removal - Tires/Wheels - Suspension System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Tire Removal

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Suspension System / Tires/Wheels / Tire Removal

1.
Remove valve core and deflate the tire.
2.
Remove the side of the tire bead area from the wheel using tire changing machine .

  
•
The tire bead should be broken approx. 90° from the valve side of the wheel. The bead breaker should not be set too deep.
•
Avoid tire/tool contact with the valve on dismount.
•
Dismount should end near the valve.
3.
Rotate the wheel clockwise.
Tire Wear
1. Measure the tread depth of the tires. Tread depth [limit] : 1.6 mm (0.0630 in.) 2. If the re ...

Tire Installation
1. Apply tire soap or lubrication to the top and bottom tire beads. 2. To fit the bottom bead, position the valve at the 5 o’clock pos ...

See also:

Circuit Diagram
Connector Pin Information No. Wire harness connector Panorama motor Blind motor 1 Ground 1 ...

Troubleshooting
Problem Symptoms Table Use the table below to help you find the cause of the problem. The numbers indicate the priority of the like cause of the problem. Check each part in order. ...

Canister Close Valve (CCV)
Canister Close Valve (CCV) is installed on the canister ventilation line. It seals evaporative emission control system by shutting the canister from the atmosphere when leakage detecting syst ...

Categories

Copyright www.ksmanual.com 2014-2026