Control Pressure kpa (kgf/cm², psi) |
539.370 ~ 0 ( 5.5 ~ 0, 78.23 ~ 0) |
Current value(mA) |
0 ~ 850 |
Internal resistance(Ω) |
5.1 В± 0.3 |
Blind Spot Detection Unit Installation
1.
Install the BSD units to the rear bumper.
2.
Install the rear bumper.
3.
Connect the negative (-) battery te ...
Starter Removal
1.
Disconnect the battery negative terminal.
2.
Remove the air duct and air cleaner assembly.
(Refer to Engine Mechanical System - &quo ...
Idler Removal and Installation
1.
Remove the drive belt.
(Refer to Timing System - "Drive Belt")
2.
Remove the idler(A).
Tightenin ...