Kia Sorento: Specifications - Multifunction switch - Body Electrical System - Kia Sorento XM 2011-2022 Service ManualKia Sorento: Specifications

Second Generation XM (2011-2022) / Kia Sorento XM 2011-2022 Service Manual / Body Electrical System / Multifunction switch / Specifications

Items
Specifications
Rated voltage
DC 12V
Operating temperature range
-22 ~ +176°F (-30°C ~ +80°C)
Rated load
Dimmer & passing
switch
High : 1.0A (Relay load)
Low : 1.0A (Relay load)
Passing : 1.0A (Relay load)
Lighting switch
Lighting : 1.0A (Relay load)
Turn signal switch
6.6 ± 0.5A (Lamp load)
Wiper & mist switch
Low, High : 4.0A (Motor load)
Intermittent : 0.22 ± 0.05A (Relay load)
Lock : Max. 28A (Motor load)
Mist : 4.0A (Motor load)
Washer : 4.0A (Motor load)
Front fog lamp switch
1.0A (Relay load)
Rear wiper & washer
Wiper : 0.2A (Relay load)
Washer : 4.0A (Motor load)

Multifunction switch
...

Component
...

See also:

Defrosting
If equipped Select the or mode to defrost or dehumidify the windshield and front door windows. NOTE When the or mode is selected, the air conditioner compressor operates automatically ...

Reverse Automatic Braking (RAB) system ON/OFF setting
While the select lever is shifted to the “R” position, the below functions of the Reverse Automatic Braking (RAB) system can be set by operating the audio/navigation monitor. ON setting key ...

AC Inverter Unit Installation
1. Install the AC inverter unit. 2. Install the luggage side trim. 3. Connect the negative (-) battery terminal ...

Copyright © www.ksmanual.com 2014-2022