Kia Sorento: Specification - Variable Intake Solenoid (VIS) Valve - Engine Control System - Engine Control / Fuel System - Kia Sorento XM 2011-2024 Service ManualKia Sorento: Specification

Second Generation XM (2011-2024) / Kia Sorento XM 2011-2024 Service Manual / Engine Control / Fuel System / Engine Control System / Variable Intake Solenoid (VIS) Valve / Specification

Item
Specification
Coil resistance (Ω)
30.0 ~ 35.0 [20°C(68°F)]

Variable Intake Solenoid (VIS) Valve
Variable Intake manifold Solenoid (VIS) valve is installed on the intake manifold. The VIS valve controls the vacuum modulator which activates a valve in the intake manifold. The ECM opens or ...

Circuit Diagram
...

See also:

Components Operations
PCM (Power Train Control Module) 1. The PCM(ECM)(A) carries out a check of the ignition key using a special encryption algorithm, which is programmed into the transpond ...

SRS Control Module (SRSCM) Removal
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least three minutes before beginning ...

Inspection
1. Turn ignition switch OFF. 2. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") ...

Copyright © www.ksmanual.com 2014-2024