Kia Sorento: Seat Belt Buckle Switch (BS) Components

Seat Belt Buckle Switch (BS) Description

The SRSCM shall monitor the status of the driver and front passenger seat belt buckle. The SRSCM provides one pin each for the driver and front passenger seat belt buckle status input. The se ...

Seat Belt Buckle Switch (BS) Removal

1. Disconnect the battery negative cable, and wait for at least three minutes before beginning work. 2. Remove the front seat assembly. (Re ...

See also:

Fender Replacement
   • When removing and installing the hood, an assistant is necessary. ...

Power Mosfet (DATC) Inspection
1. Measure the resistance between the terminals. 2. If the measured resistance is not within specification, the blower resistor must be rep ...

Fuel Sender Installation
1. Install in the reverse order of removal. ...