Kia Sorento: Rheostat Repair Procedures - Lighting System - Body Electrical SystemKia Sorento: Rheostat Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body Electrical System / Lighting System / Rheostat Repair Procedures

Removal
1.
Remove the crash pad side lower garnish.
(Refer to Body - "Crash Pad Garnish")
2.
Remove the side crash pad switch (A) after removing the screws.

Body Electrical System — Lighting System / Rheostat / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
Inspection
1.
Check the switch terminal and replace it if there is a problem.

Body Electrical System — Lighting System / Rheostat / Repair Procedures / Inspection illustration

Body Electrical System — Lighting System / Rheostat / Repair Procedures / Inspection illustration

Rear Combination Lamp Repair Procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Open the rear combination lamp cap...
Room Lamp Repair Procedures
Removal 1. Disconnect the battery negative ( - ) terminal. 2. Remove the room lamp lens (A). ...
See also:

Operating conditions. Deactivating ISG
Operating conditions The ISG system on your Kia Sorento functions only when a strict set of environmental and mechanical parameters are met: The driver's safety seat belt is sec ...

Specifications
Items Specification Hood Type Rear hinged, gas lifter type Front Door Construction Front hinged, full door construction ...

Front Corner Radar Installation
Installation 1. Install in the reverse order of removal. ...

Copyright © www.ksmanual.com 2014-2026 - 0.0581