1. |
Check the bushing for wear and deterioration.
|
2. |
Check the rear upper arm or damage and deformation.
|
3. |
Check for all bolts and nut.
|
Inspection
1.
Connect the GDS on the Data Link Connector (DLC).
2.
Turn the ignition switch ON.
3.
Measure the output volt ...
Crash Pad Components
1. Main crash pad assembly
2. Crash pad side cover [LH]
3. Crash pad side cover [RH]
4. Center fascia panel
5. Crash pad lower panel
6. Reinforce panel
...
Fuel Pump Installation
1.
Install in the reverse order of removal.
Be careful of fuel pump direc ...