Kia Sorento: Rear Spoiler Repair Procedures

Removal

1.	Disconnect the battery negative ( - ) terminal.

2.	Remove the tailgate upper trim. (Refer to Tailgate - "Tailgate Trim")

3.	Disconnect the rear spoiler connector (A).

4.	Separate the rear washer nozzle (A).

5.	Remove the rear spoiler hole plug (A).

Remove the rear spoiler nuts (A).

Tightening torque :

2.9 - 4.9 N·m (0.3 - 0.5 kgf·m, 2.2 - 3.6 lb·ft, 26 - 43.4 lb·in)

Body (Interior and Exterior) — Body Side Molding / Rear Spoiler / Repair Procedures / Removal illustration

Remove the rear spoiler (A).

Body (Interior and Exterior) — Body Side Molding / Rear Spoiler / Repair Procedures / Removal illustration

Clip position :

Body (Interior and Exterior) — Body Side Molding / Rear Spoiler / Repair Procedures / Removal illustration

Installation

1.	Install in the reverse order of removal.

Rear Mud Guard Repair Procedures Removal 1. Remove the rear mud guard (A) after removing the screws and fasteners. ...

Emblem attached area • Standard measurement : Top of emblem from end of tailgate panel (vehicle center) ...

Manuals list