Kia Sorento: Rear Shock Absorber Inspection

Rear Shock Absorber Removel

2WD 1. Remove the rear wheel and tire (A) from rear hub . Tightening torque: 88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 ...

Rear Shock Absorber Installation

1. Installation is the reverse of removal.    After checking the distance 45 ...

See also:

Engine coolant
The high-pressure cooling system has a reservoir filled with year round antifreeze coolant. The reservoir is filled at the factory. Check the antifreeze protection and coolant level at least once a ...

ECM Problem Inspection Procedure
1. TEST ECM GROUND CIRCUIT: Measure resistance between ECM and chassis ground using the backside of ECM harness connector as ECM side check point. If the problem is fo ...

Tires/Wheels
   • Using tires and wheel other than the recommended sizes could cause unusual handling ...