Kia Sorento: Rear Seat Cushion Cover Repair Procedures
| Removal and Installation |
| [2nd Seat Cushion Cover] |
| 1. |
Remove the 2nd seat assembly [LH].
(Refer to Seat (Rear) - "Rear Seat Assembly")
|
| 2. |
Remove the second row seat inner shield cover (A) by removing the mounting screw.
|
| 3. |
Remove the second row seat back armrest bracket (A) by removing the mounting bolt and nuts.
|
| 4. |
Remove the second row seat recliner lever cap (A). by using a flat-head screwdriver or remover.
|
| 5. |
Remove the second row seat recliner lever (A) removing the mounting bolt.
|
| 6. |
Remove the second row outer shield cover (A) by removing the mounting screw.
|
| 7. |
Remove the protector (A) by using a remover.
|
| 8. |
Disconnect the each connector (A).
|
| 9. |
Remove the 2nd seat cushion assembly (A) from the 2nd seat cushion frame.
|
| 10. |
Remove the velcro tape (B) and the hog ring clip (A) from inside the second row seat back cover.
|
| 11. |
Remove the second row seat back cover (A) from the second row seat back pad.
|
| 12. |
Install in the reverse order of removal.
|
| 1. |
Remove the 2nd seat assembly [RH].
(Refer to Seat (Rear) - "Rear Seat Assembly")
|
| 2. |
Remove the second row seat recliner lever cap (A). by using a flat-head screwdriver or remover.
|
| 3. |
Remove the second row seat recliner lever (A) removing the mounting bolt.
|
| 4. |
Remove the second row outer shield cover (A) by removing the mounting screw.
|
| 5. |
Remove the second row seat inner shield cover (A) by removing the mounting screw.
|
| 6. |
Disconnect the heated wire connector (A).
|
| 7. |
Remove the protector (A) by using a remover.
|
| 8. |
Remove the 2nd seat cushion assembly (A) from the 2nd seat cushion frame.
|
| 9. |
Remove the velcro tape (B) and the hog ring clip (A) from inside the second row seat back cover.
|
| 10. |
Remove the second row seat back cover (A) from the second row seat back pad.
|
| 11. |
Install in the reverse order of removal.
|
| 1. |
Remove the 2nd seat assembly.
(Refer to Seat (Rear) - "Rear Seat Assembly")
|
| 2. |
Remove the recliner lever cap (A).
|
| 3. |
Remove the recliner lever (A) after removing the screw.
|
| 4. |
Remove the second row seat lever garnish (A).
|
| 5. |
Disconnect the rear cushion folding switch connector (A).
|
| 6. |
Remove the rear seat shield outer cover (A).
|
| 7. |
Remove the second row seat inner shield cover (A) by removing the mounting screw.
|
| 8. |
Disconnect the rear seat cushion connector (A).
|
| 9. |
Remove the rear seat cushion protectors (A).
|
| 10. |
Remove the rear seat cushion assembly (A).
|
| 11. |
Remove the velcro tape (A) and the hog ring clip (B) from inside the second row seat cushion cover.
|
| 12. |
Remove the second row seat cushion cover (A) from the second row seat cushion pad.
|
| 13. |
Install in the reverse order of removal.
|
| [3rd Seat Cushion Cover] |
| 1. |
Remove the 3rd seat assembly.
(Refer to Seat (Rear) - "Rear Seat Assembly")
|
| 2. |
Remove the protector (A) by using a remover.
|
| 3. |
Remove the third row seat cushion assembly by from the third row seat cushion frame.
|
| 4. |
Remove the velcro tape (B) and the hog ring clip (A) from inside the third row seat cushion cover.
|
| 5. |
Remove the third row seat cushion cover (A) from the third row seat cushion pad.
|
| 6. |
Install in the reverse order of removal.
|
Rear Seat Back Cover Repair Procedures
Tailgate
See also:
Master Cylinder Components
1. Reservoir cap
2. Reservoir
3. Grommet
4. Master cylinder
...
Seat Heater Inspection
Front seat
1.
Operate the seat warmer after connecting the connector, and then
check the thermostat by measuring the temperature of seat surface.
...
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.8 L
(2.06 U.S gal.,8.24 U.S.qt., 6.86 Imp.qt.)
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
