Kia Sorento: Rear Pillar Trim Repair Procedures
Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Interior Trim / Rear Pillar Trim Repair Procedures
| Removal and Installation |
| 1. |
Remove the rear door body side weatherstrip.
(Refer to Door (Rear) - "Rear Door Weatherstrip")
|
| 2. |
Remove the luggage side trim.
(Refer to Luggage Side - "Luggage Side Trim")
|
| 3. |
Remove the 2nd seat seat belt upper anchor cover (A).
|
| 4. |
Remove the 2nd seat seat belt upper anchor (A) after removing the bolt.
|
| 5. |
Remove the rear pillar trim (A) after removing the bolts.
|
| 6. |
Install in the reverse order of removal.
|
Removal and Installation
Center Pillar Lower Trim
1.
Remove the front and rear door scuff trim.
(Refer to Interior Trim - "Door Scuff Tri...
Center Pillar Trim Repair Procedures
Removal and Installation
1.
Remove the luggage side trim.
(Refer to Luggage Trim - "Luggage Side Trim")
...
Tailgate Pillar Trim Repair Procedures
See also:
Front Driveshaft Components and Components Location
Components
1. Front driveshaft (LH)2. Inner shaft bearing
bracket
3. Front driveshaft (RH)
...
Rear Cross Member Replacement
1.
Remove the rear wheel & tire.
Tightening torque :
88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)
...
Tire sidewall labeling
This information identifies and describes the fundamental characteristics of
the tire and also provides the tire identification number (TIN) for safety standard
certification. The TIN can be used ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.071