Kia Sorento: PTC Heater Inspection
Kia Sorento (MQ4, 2021-2026) Service Manual / Heating,Ventilation And Air Conditioning / Heater / PTC Heater Inspection
| Inspection |
Operation inspection
Perform this inspection in the PTC ON state.
|
| 1. |
Turn the IG OFF.
|
| 2. |
Measure the current value of the wiring with a clamp multimeter.
|
| 3. |
If the current value deviates from the reference value, inspect the relevant wiring.
|
Resistance Inspection
| 1. |
IG OFF.
|
| 2. |
Disconnect the PTC heater connector.
|
| 3. |
Measure the resistance of the PTC heater 1 or 2 terminal and ground terminal.
|
| 4. |
If the resistance value is not within the standard value, replace it with a new PTC heater.
|
Removal
1.
Remove the heater unit.
(Refer to Heater - "Heater Unit")
2.
Remov...
PTC Heater Removal and Installation
...
Controller
See also:
Drive Belt Removal and Installation
Inspection
1.
Check belt for maintenance and abnormal wear of V-ribbed part. Replace if necessary.
...
Instrument panel overview
1. Audio remote control buttons
2. Driver ...
General Inspection
After or before servicing the EPS system, perform the troubleshooting
and test procedure as follows. Compare the system condition with normal condition
in the table below and if abnormal symp ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0489