Kia Sorento: Paddle shifter: (if equipped) - Automatic transmission (shift lever) : (if equipped) - Driving your vehicleKia Sorento: Paddle shifter: (if equipped)

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driving your vehicle / Automatic transmission (shift lever) : (if equipped) / Paddle shifter: (if equipped)

The steering-wheel-mounted paddle shift function is fully accessible whenever your Kia Sorento gear selector is positioned in either the standard D (Drive) mode or manual gate.

Steering wheel paddle shifters for manual gear control in the Kia Sorento cabin

With the gear shift lever in D (Drive)

The paddle shifting capability becomes active once your Kia Sorento exceeds a forward speed of 6 mph (10 km/h).

Pull either the right (+) or left (-) paddle once to instantly execute an upward or downward gear change. This action seamlessly transitions the transmission control logic from standard automatic operation into temporary manual mode.

To return your Kia Sorento from manual shift control back to fully automatic operation, you can utilize any of the following convenient methods:

The transmission will also automatically revert from manual mode back to standard automatic operation under specific driving conditions:

With the gear shift lever in manual mode

Pulling either the (+) or (-) paddle once while operating directly in the manual gate will command an immediate 1-step gear change.

TIP

Pulling both the left and right paddle shifters simultaneously is an invalid command and will be ignored by the transmission control module to prevent accidental mis-shifts.

Transmission ranges
The digital indicator on the instrument cluster clearly shows the active gear shift lever position whenever the ENGINE START/STOP button is switched to the ON position. P (Park) Always bring yo ...

Shift lock system. Shift-lock override
For enhanced safety and security, the automatic transmission in your Kia Sorento features an integrated shift lock mechanism that physically blocks you from moving the gear selector out of P (Par ...

See also:

IMS Power Seat Control Circuit Diagram
...

3. TCM Terminal input/ output signal
Connector [A] Pin No. Signal Condition Type Level 29 Sports mode up switch Up ON Input 0V/Battery voltage level ...

Parking Assist Sensor Installation
1. Install the rear ultra sensor after connecting the connector. 2. Install the rear bumper cover. 3. Connect t ...

Copyright © www.ksmanual.com 2014-2026