Kia Sorento: IMS Power Seat Control Circuit Diagram

IMS module Installation

1. Install the IMS module after reconnecting the connector. 2. Install the driver seat.    ...

IMS Power Seat Control Inspection

1. With the power seat switch in each position, make sure that continuity exists between the terminals below. If continuity is not as specified, replace the power seat ...

See also:

Removal
1. Remove the air duct. (Refer to Engine Mechanical System - "Air cleaner") 2. Remove the battery and the battery tray. ...

Failure Diagnosis
1. In principle, ESC and TCS controls are prohibited in case of ABS failure. 2. When ESC or TCS fails, only the failed system control is pr ...

Inspection
1. Disconnect the ignition switch connector (B) and key warning switch connector (A) from under the steering column. 2. Che ...