Kia Sorento: Oil Temperature Sensor (E-Module) On Vehicle Inspection

Kia Sorento (MQ4, 2021-2026) Service Manual / Automatic Transaxle System / Automatic Transaxle Control System / Oil Temperature Sensor (E-Module) On Vehicle Inspection

Inspection

1.

The automatic transaxle system can be more quickly diagnosed for problems by using the vehicle diagnostic system (KDS). (Refer to "DTC guide")

(1)	Self Diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS (Refer to DTC guide when fault code is found)

(2)

Data Analysis : Checking the system input/output data state

(Data Analysis → System Selection → Oil Temperature Sensor)

Item	Specification
Type	*NTC thermistor
Temp.(°C [°F]) / Resistance (kΩ)	(-40 [-40]) / 48.1
	(-20 [-4]) / 15.6
	(0 [32.0]) / 5.88
	(20 [68.0]) / 2.51
	(40 [104.0]) / 1.19
	(60 [140.0]) / 0.61
	(80 [176.0]) / 0.32
	(100 [212.0]) / 0.18
	(120 [248.0]) / 0.10
	(140 [284.0]) / 0.06
	(150 [302.0]) / 0.05

Oil Temperature Sensor (E-Module) Components and Components Location. Oil Temperature Sensor (E-Module) Description and Operation

Oil Temperature Sensor (E-Module) Components and Components Location Component 1. ATF Warmer Hose2. Valve Body Cover2-a. 11.8 - 13.7 N·m ...

Oil Temperature Sensor (E-Module) Removal

Removal ...

See also:

For best battery service
Keep the battery securely mounted. Keep the battery top clean and dry. Keep the terminals and connections clean, tight, and coated with petroleum jelly or terminal grease. Rinse any spill ...

Output Speed Sensor Inspection
1. Check signal waveform of Input & output speed sensor using the GDS. Specification : Refer to "Signal Wave Form" section. ...

Fuel Sender Removal and Installation. Fuel Tank Specifications. Fuel Tank Components and Components Location
Fuel Sender Removal and Installation. Fuel Tank Specifications Fuel Sender Removal and Installation Removal 1. Remove the fuel pump mo ...

Manuals list

Copyright © www.ksmanual.com 2014-2026 - 0.0586