Kia Sorento: Mode Control Actuator Removal and Installation
| Removal |
| 1. |
Remove the main crash pad assembly.
(Refer to Body - "Main Crash Pad Assembly")
|
| 2. |
Disconnect the driver's side mode control actuator connector (A).
|
| 3. |
Remove the driver's mode control actuator (A) after removing the screws.
|
| 1. |
Remove the crash pad center panel.
(Refer to Body - "Crash Pad Center Panel")
|
| 2. |
Disconnect the passenger's side duct sensor connector (A).
|
| 3. |
Remove the passenger's side shower duct (A) after removing the screws.
|
| 4. |
Disconnect the passenger's side mode control actuator connector (A).
|
| 5. |
Remove the passenger's side mode control actuator (A) after removing the screws.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Mode Control Actuator Description and Operation
Mode Control Actuator Inspection
See also:
Highway Driving Assist
Display and control
The operational status of the Highway Driving Assist system in your Kia Sorento is clearly visible within the
dedicated Driving Assist view on the vehicle's instrument clus ...
Rear Glass Defogger Switch Inspection
1.
It will be able to diagnose defects of rear glass defogger with
GDS quickly. GDS can operates actuator forcefully, input/output value
monitoring and self diagnosis. ...
Front Hub / Knuckle / Tone Wheel Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
