Kia Sorento: Lighting

Rearview camera (If equipped)

The rearview camera will activate with the ignition switch ON and the shift lever in the R (Reverse) position. This system is a supplemental system that shows behind the vehicle through the rearv ...

Battery saver function

The purpose of this feature is to prevent the battery from being discharged if the lights are left in the ON position. The system automatically shuts off the parking lights 30 seconds after the ...

See also:

Accelerator Position Sensor (APS)
Accelerator Position Sensor (APS) is installed on the accelerator pedal module and detects the rotation angle of the accelerator pedal. The APS is one of the most important sensors in engine ...

Air Ventilation Seat Control Unit Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the air ventilation seat control unit (A) after loosening screws. ...

Smart key unit Installation
Smart Key Unit 1. Install the smart key unit. 2. Install the smart key unit mounting bolt and nut, and then connect the connector. ...