Kia Sorento: Knock Sensor (KS) Removal and Installation

Removal

1.	Remove the intake manifold. (Refer to Engine Mechanical System - "Intake Manifold")

2.	Disconnect the Engine Coolant Temperature Sensor (ECTS) connector (A).

3.	Disconnect the Oil Pressure & Oil Temperature Sensor (OPTS) connector (A).

Remove the Knock Sensor (KS) (A) after removing the mounting bolt.

Tightening torque :

18.6 - 23.5 N·m (1.9 - 2.4 kgf·m, 13.7 - 17.4 lb·ft)

Engine Control / Fuel System — Engine Control System / Knock Sensor (KS) / Removal and Installation / Removal illustration

Installation

Install in the reverse order of removal.

•	Install the Knock Sensor (KS) to the specified torque.

•	If the KS is dropped, it may cause internal damage. (Do not reuse)

On Vehicle Inspection 1. The engine control system can be more quickly diagnosed for problems with the KDS. (Refer to "DTC guide") ...

Specification Manifold Absolute Pressure Sensor (MAPS) Pressure Output Voltage (V) kPa ...

Manuals list