Intake Actuator Description
The intake actuator is located at the blower unit. It regulates the intake
door by a signal from the control unit. Pressing the intake selection switch
will shift between recirculation and fr ...
Troubleshooting
Problem
Possible cause
Solution
Not pairing
Bluetooth device of Car is not discoverable mode
Enter Bluetooth pairing (searching) mode
Userв ...
Starter Installation
1.
Install in the reverse order of removal.
Starter installation bolt:
49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ~ 47.0 lb-ft)
...