Kia Sorento: Injector Specifications. Injector Components and Components Location
Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Control / Fuel System / Fuel Delivery System / Injector Specifications. Injector Components and Components Location
Injector Specifications
| Specification |
| Item |
Specification |
|
| Coil resistance (Ω) |
MPI |
11.4 - 12.6 |
|
GDI |
1.425 - 1.575 |
|
Injector Components and Components Location
| Component Location |
| 1. GDI Injector 2. MPI Injector 3. Low Pressure Fuel Pipe |
4. GDI High Pressure Fuel Pipe 5. GDI High Pressure Fuel Pump 6. Low Pressure Fuel Line |
Removal
1.
Release the residual pressure in fuel line.
(Refer to the Fuel Delivery System - "Release Residual Pressure in
Fu...
High Pressure Fuel Pump Removal and Installation
Description
•
Based on information from various sensors, the Engine Control Module (ECM) can calculate the fuel amount to
...
Injector Description and Operation
See also:
Panorama Sunroof Replacement
Movable Glass Replacement
1.
Tilt the rear part of the movable glass (A) using the panorama
sunroof switch.
2.
Remove both side ...
Instrument Cluster Installation
1.
Connect the cluster connector.
2.
Install the cluster assembly.
3.
Install the cluster facia panel.
...
Steering Gear Box Components and Components Location
Components
[C-MDPS]
1. Heat protector2. Dust
cap3. Bellows
4. Tie rod end5. Front sub
frame
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0694