Kia Sorento: Infotainment Jack Repair Procedures - Infotainment System - Body Electrical SystemKia Sorento: Infotainment Jack Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body Electrical System / Infotainment System / Infotainment Jack Repair Procedures

Removal
Infotainment Jack
1.
Remove the floor console tray.
(Refer to Body - “Floor Console Assembly”)
2.
Disconnect the infotainment jack connector (A).

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

3.
Remove the infotainment jack assembly (A) after removing the screws.

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

Infotainment Jack Cable
1.
Remove the floor console assembly.
(Refer to Body - “Floor Console Assembly”)
2.
Remove the Connected Car Navigation Cockpit (ccNC).
(Refer to Infotainment System - “Connected Car Navigation Cockpit (ccNC)”)
3.
Remove the infotainment jack cable (A).

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

Information
Clip position :

Body Electrical System — Infotainment System / Infotainment Jack / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
External AMP Repair Procedures
Removal 1. Remove the luggage floor box. (Refer to Body - "Rear Transverse Trim") 2. ...
Integrated Monitor Components and Components Location
Component 1. Rear Display Cover 2. Integrated Monitor...
See also:

ATF Warmer Component Location
1. ATF Warmar 2. Bypass valve 3. ATF hose & pipe 4. Coolant hose & pipe ...

Battery Sensor Installation
1. Install in the reverse order of removal. Battery sensor cable installation bolt: 10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...

Conditions and operation of the front passenger Occupant Detection System (ODS)
Condition detected by the occupant detection system Indicator/Warning light Devices ...

Copyright © www.ksmanual.com 2014-2026 - 0.0488