Kia Sorento: IMS Power Seat Control Removal
Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Body Electrical System / IMS (Integrated Memory) / IMS Power Seat Control Removal
| 1. |
Disconnect the negative (-) battery terminal.
|
| 2. |
Remove the power seat control switch connectors (A).
(Refer to Body - "Front seat")
|
| 3. |
Remove the power seat switch (A) after disengaging the hook holder.
|
IMS Power Seat Control Inspection
1.
With the power seat switch in each position, make sure that continuity
exists between the terminals below. If continuity is not as specified,
replace the power seat ...
IMS Power Seat Control Installation
1.
Install the power seat control switch after connecting the connector.
...
See also:
Troubleshooting
Ignition System
Symptom
Suspect Area
Remedy
Engine will not start or is hard to
start (Cranks OK)
Ignition lock switch
Inspect ignition ...
Cruise Control Switch Installation
1.
Install in the reverse order of removal.
...
TJ Joint Inspection
1.
Check the spider assembly for roller rotation, wear or corrosion.
2.
Check the groove inside the joint case for wear or corrosion
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
Copyright www.ksmanual.com 2014-2026