Kia Sorento: Horn

Repair Procedures

Removal

1.	Remove the front bumper assembly. (Refer to Body - "Front Bumper Assembly")

Disconnect the horn connector (B) and remove the horn (A) after removing the bolt.

Tightening torque :

11.1 - 12.3 N·m (1.13 - 1.25 kgf·m, 8.2 - 9.0 lb·ft)

[Low pitch]

Body Electrical System — Horn / Repair Procedures / Removal illustration

[High pitch]

Body Electrical System — Horn / Repair Procedures / Removal illustration

Installation

1.	Install in the reverse order of removal.

Inspection

1.	Apply battery voltage to terminal 1 (ground) and terminal 2 (battery+) and verify that it operates.

2.	Check fuse and relay.

Headlamp Leveling Switch Repair Procedures Removal 1. Remove the crash pad lower panel. (Refer to Body - "Crash Pad Lowe...

Ignition Switch Repair Procedures Removal Ignition Switch 1. Disconnect the negative (-) battery terminal. ...