Kia Optima Manuals

Kia Sorento: Hood Latch Assembly Repair Procedures - Hood - Body (Interior and Exterior)Kia Sorento: Hood Latch Assembly Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Latch Assembly Repair Procedures

Removal and Installation
1.
Remove the front bumper assembly.
(Refer to Bumper (Front) - "Front Bumper Assembly")
2.
Disconnect the hood latch connector (A).

Body (Interior and Exterior) — Hood / Hood Latch Assembly / Repair Procedures / Removal and Installation illustration

3.
Remove the hood latch assembly (A) after removing the bolts.
Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

Body (Interior and Exterior) — Hood / Hood Latch Assembly / Repair Procedures / Removal and Installation illustration

4.
Separate the hood latch cable (A).

Body (Interior and Exterior) — Hood / Hood Latch Assembly / Repair Procedures / Removal and Installation illustration

Installation
1.
Install in the reverse order of removal.
Hood Latch Release Handle Repair Procedures
Removal 1. Remove the hood latch release handle (A) after retracting the fixing hook inside. ...
Interior Trim
...
See also:

Delivery Pipe Removal
   In case of removing the high pressure fuel pump, high pressure fuel pipe, delivery pipe, and injector, there may be inju ...

Declaration of conformity
FCC This sophisticated electronic equipment installed in your Kia Sorento has undergone rigorous testing and proven compliance with the stringent thresholds established for a Class B digital dev ...

PTC Heater Inspection
Inspection Operation inspection ...

Manuals list

Copyright © www.ksmanual.com 2014-2026 - 0.0896