Kia Sorento: Hood Assembly Repair Procedures. Hood Insulator Pad Repair Procedures
Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Hood / Hood Assembly Repair Procedures. Hood Insulator Pad Repair Procedures
Hood Assembly Repair Procedures
| Removal |
The procedure below requires at least two people.
|
| 1. |
Remove the hood assembly (A) after removing the bolts.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Hood Insulator Pad Repair Procedures
| Removal |
| 1. |
Remove the hood insulator pad (A) after removing the fasteners.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
Components and Components Location
Component and Component Location
Hood
1. Hood Assembly 1-a. 21.6 - 26.5 N·m (2.2...
Components and Components Location. Adjustment
Removal
1.
Remove the hood latch release handle (A) after retracting the fixing hook inside.
...
Hood Latch Release Handle Repair Procedures
See also:
Cylinder Head Disassembly
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they
are removed so that each item can be reinstalled i ...
Heater & A/C Control Unit (Manual) Component
Connector Pin Function
Connector
Pin No
Function
Connector
Pin No
Function
A
1
Ground
B
18
IG ...
Immobilizer system (if equipped)
Your vehicle is equipped with an electronic engine immobilizer system to reduce
the risk of unauthorized vehicle use.
Your immobilizer system is comprised of a small transponder in the ignition key
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0544