Kia Sorento: Components and Components Location. Adjustment

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Hood / Components and Components Location. Adjustment

Components and Components Location

Component and Component Location

Hood

Body (Interior and Exterior) — Hood / Components and Components Location / Component and Component Location illustration

1. Hood Assembly
1-a. 21.6 - 26.5 N·m (2.2 - 2.7 kgf·m, 15.9 - 19.5 lb·ft)
2. Hood Insulator Pad
3. Hood Lifter
4. Hood Hinge
4-a. 21.6 - 26.5 N·m (2.2 - 2.7 kgf·m, 15.9 - 19.5 lb·ft)

5. Hood Latch
5-a. 7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)
6. Hood latch cable
7. Hood Latch Release Handle
8.Hood front strip
9. Hood Weatherstrip

Adjustment

1.	Loosen the hood hinge (A) bolt to the body.

2.	Tighten the bolts after adjusting the hood by moving it in all directions.

3.	Adjust the height of the hood by turning the overslam bumper (B) in clockwise and counterclockwise.

4.	Loosen the hood latch (C) bolts, adjust the hood latch by moving it up, down, left and right, and then tighten the bolts.

5.	When the hood is closed after the completion of adjustment, check if there is an iron noise when the front hood latch area of the hood assembly outer plate is tapped. If there is iron noise, increase the overlap by adjusting the two hood overslam bumpers down one quarter to a half of a turn.

Hood

...

Hood Assembly Repair Procedures. Hood Insulator Pad Repair Procedures

Hood Assembly Repair Procedures Removal ...

Kia Sorento: Components and Components Location. Adjustment

Components and Components Location

Adjustment

See also:

Manuals list