Kia Sorento: High beam operation. Turn and lane change signal operation. One-touch lane change function - Lighting - Driver AdjustmentsKia Sorento: High beam operation. Turn and lane change signal operation. One-touch lane change function

Kia Sorento (MQ4, 2021-2026) Owner's Manual / Driver Adjustments / Lighting / High beam operation. Turn and lane change signal operation. One-touch lane change function

High beam operation

Kia Sorento high beam headlight lever push action

Turn and lane change signal operation. One-touch lane change function

Kia Sorento turn signal lever operation for turns and lane changes

The ENGINE START/STOP button must be ON for the turn signals to function.

If an indicator stays on and does not flash, or if it flashes abnormally, one of the turn signal bulbs may be burned out and need to be replaced.

One-touch lane change function

To use the one-touch lane change function, move the turn signal lever slightly, then release it. The lane change signals will blink 3, 5, or 7 times.

You can activate or deactivate the one-touch lane change function or choose the length of blinking (3, 5, or 7 times) by selecting User Settings > Lights > One Touch Turn Signal.

NOTE

If an indicator flash is abnormally quick or slow, a bulb may have a poor electrical connection in the circuit, or it may be burned out and need to be replaced.

Daytime running light (DRL): (if equipped). Lighting control
Daytime running light (DRL): (if equipped) The DRL can make it easier for others to see the front of your Kia Sorento during the day. The DRL can be helpful in many different driving conditions, espe...
Front fog light operation: (if equipped). High Beam Assist (HBA)
Front fog light operation: (if equipped) Fog lights are designed to improve visibility in fog, rain, or snow. ...
See also:

Front Fog Lamps Installation
1. Install the front fog lamp bulb. 2. Connect the fog lamp connector. 3. Install the front tire wheel guard. ...

Crankshaft Inspection
1. Check the crankshaft bearing oil clearance. (1) To check main bearing-to-journal oil clearance, remove the main caps and bearing ...

Injector
The GDI injector is similar to a standard injector, but sprays fuel at a much higher pressure directly into the combustion chamber and has a swirl disc to get the fuel swirling as it exits th ...

Copyright © www.ksmanual.com 2014-2026 - 0.0406