Kia Sorento: Heater and Air Conditioning Controller On Vehicle Inspection
|
•
|
During the self-diagnosis, fault code is displayed on the set temperature display and turn off all
the others.
|
|
•
|
During the self-diagnosis, the air conditioning control remains OFF.
|
|
•
|
During the self-diagnosis, the following fault details (self-diagnosis code) are displayed on the
set temperature display unit by blinking at 0.5 second intervals.
|
|
•
|
When IG OFF & ON during self-diagnosis, the system returns to the OFF state.
|
|
| 1. |
How to display fault codes
| (1)
|
Continuous operation : Normal or in case of one fault
|
| (2)
|
Continuous operation : Multiple faults
|
| (3)
|
During STEP operation
| a. |
Normal or one fault is same as continuous operation.
|
| b. |
In case of multiple faults
|
|
|
| 1. |
The heater and A/C controller can be more quickly diagnosed for problems with the KDS (Refer to "DTC
guide").
| (1)
|
Self diagnosis : Inspect the Diagnostic Trouble Code (DTC) with the KDS.
(Refer to DTC guide when fault code is found.)
|
|
Refer to the KDS screen for operating conditions and details
|
|
Removal
1.
Remove the passenger's side crash pad center garnish.
(Refer to Body - "Crash Pad Garnish")
...
See also:
Delivery Pipe Removal
In case of removing the high pressure fuel pump, high pressure
fuel pipe, delivery pipe, and injector, there may be inju ...
Injector Removal and Installation
Removal
1.
Remove the injector.
(Refer to Fuel Delivery System - "Delivery Pipe")
...
General Service Information
General Information
General Service Information
1.
Protect the vehicle's protective painted surfaces and internal parts with wor ...
Controller
Heater and Air Conditioning Controller Removal and Installation
