Kia Sorento: Fuel Filler Cap Description - Evaporative Emission Control System - Emission Control System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Fuel Filler Cap Description

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Emission Control System / Evaporative Emission Control System / Fuel Filler Cap Description

A ratchet tightening device on the threaded fuel filler cap reduces the chances of incorrect installation, which would seal the fuel filler. After the gasket on the fuel filler cap and the filler neck flange contact each other, the ratchet produces a loud clicking noise indicating the seal has been set.

1. Cover
2. Torsion spring
3. Retainer
4. Gasket seal
5. Spring
6. Plate seal
7. Vacuum valve
8. Spring

Canister Installation
1. Install in the reverse order of removal. ...

Fuel Tank Air Filter Removal
1. Turn the ignition switch OFF and disconnect the battery negative (-) cable. 2. Lift the vehicle. 3. D ...

See also:

Fuel Filler Door Open Switch Inspection
1. Remove the front door trim panel. (Refer to Body - "Front door") 2. Disconnect the switch connector (A) from wiring. ...

Rear Disc Brake Inspection
Rear Brake Disc Thickness Check 1. Check the brake pads for wear and fade. 2. Check the brake disc for damage and cracks. ...

Engine And Transmission Assembly Removal
   • Use fender covers to avoid damaging painted surfaces. • ...

Copyright www.ksmanual.com 2014-2026