Kia Sorento: Front Seat Shield Outer Cover Repair Procedures - Seat (Front) - Body (Interior and Exterior)Kia Sorento: Front Seat Shield Outer Cover Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Seat (Front) / Front Seat Shield Outer Cover Repair Procedures

Removal and Installation
1.
Remove the front seat assembly.
(Refer to Seat (Front) - "Front Seat Assembly")
2.
Remove the outer shield cover (A) after removing the screw.

Body (Interior and Exterior) — Seat (Front) / Front Seat Shield Outer Cover / Repair Procedures / Removal and Installation illustration

Body (Interior and Exterior) — Seat (Front) / Front Seat Shield Outer Cover / Repair Procedures / Removal and Installation illustration

Information
Clip position :

Body (Interior and Exterior) — Seat (Front) / Front Seat Shield Outer Cover / Repair Procedures / Removal and Installation illustration

3.
Disconnect the power seat switch connector (A).

Body (Interior and Exterior) — Seat (Front) / Front Seat Shield Outer Cover / Repair Procedures / Removal and Installation illustration

4.
Install in the reverse order of removal.
Front Seat Assembly Repair Procedures
Removal and Installation 1. Disconnect the battery negative ( - ) terminal. 2. Remove the front ...
Front Seat Shield Inner Cover Repair Procedures
Removal and Installation 1. Remove the front seat assembly. (Refer to Seat (Front) - "Front Seat Assembly") ...
See also:

Wheel Hub nut tightening sequence
Tighten the hub nuts as follows. Tightening torque: 88.3 ~ 107.9N.m (9.0 ~ 11.0kgf.m, 65.1 ~ 79.6lb-ft)    ...

Engine Mounting Removal and Installation
Roll road Bracket 1. Remove the roll road bracket(A). Tightening torque Bolt (B) : 49.0 ~ 63.7 N.m (5.0 ~ 6.5 kgf.m, 36.2 ...

Tightening Torque
Tightening Torque Item N·m kgf·m lb·ft lb·in ...

Copyright © www.ksmanual.com 2014-2026 - 0.0492