Kia Sorento: Front Seat Assembly Repair Procedures

Removal and Installation

1.	Disconnect the battery negative ( - ) terminal.

Remove the front seat assembly (A) after removing the bolts.

Tightening torque :

44.1 - 58.8 N·m (4.5 - 6 kgf·m, 32.5 - 43.4 lb·ft)

[Front]

Body (Interior and Exterior) — Seat (Front) / Front Seat Assembly / Repair Procedures / Removal and Installation illustration

[Rear]

Body (Interior and Exterior) — Seat (Front) / Front Seat Assembly / Repair Procedures / Removal and Installation illustration

3.	Disconnect the each connectors (A).

Install in the reverse order of removal.

Seat bolts installation procedure

•	Place the seat in the rearmost position, check that both sides of the slide are locked, and then lightly tighten the front bolt.

•	Move the seat to the front most, check that both sides of the slide are locked, and then completely tighten the rear bolt.

•	Move the seat back to the rearmost position and completely tighten the front bolt.

•	Check the seat for smooth movement. and check the seats are fixed at each designated fixing position.

...

Removal and Installation 1. Remove the front seat assembly. (Refer to Seat (Front) - "Front Seat Assembly") ...

Manuals list