Kia Optima Manuals

Kia Sorento: Front Disc Brake Removal - Brake System - Brake System - Kia Sorento XM 2011-2026 Service ManualKia Sorento: Front Disc Brake Removal

Second Generation XM (2011-2026) / Kia Sorento XM 2011-2026 Service Manual / Brake System / Brake System / Front Disc Brake Removal

1.
Remove the front wheel & tire.
Tightening torque:
88.3 ~107.9 N.m (9.0 ~11.0 kgf.m, 65.1 ~79.6 lb-ft)
2.
Loosen the hose eyebolt (C) and caliper mounting bolts (B), then remove the front caliper assembly (A).
Tightening torque:
Brake hose to caliper (C) :
24.5 ~ 29.4 N.m (2.5 ~ 3.0 kgf.m, 18.1 ~ 21.7 lb-ft)
Caliper assembly to knuckle (B) :
78.5 ~ 98.1 N.m (8.0 ~ 10.0 kgf.m, 57.9 ~ 72.3 lb-ft)

3.
Remove the front brake disc by loosening the screws (A).
Front Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Front Disc Brake Replacement
Front brake pads 1. Loosen the guide rod bolt (B) and then remove caliper body (A). 2. Replace pad shim (D), pad retainers (C) and b ...

See also:

Removal
1. Remove the head lamp. (Refer to "Lighting system") 2. Remove the bolts and disconnect the horn connectors, then remove ...

Adjustment
After replacing ETC module or ECM, the ETC adaptive value must be reset / relearned according to the following procedure. 1. Check DTC(s) and clear if exist. ...

Troubleshooting
Symptom Suspect area Engine will not start or stuggle to start Vapor hose damaged or disconnected Engine stuggle to start Malfunction of the Purge ...

Categories

Copyright www.ksmanual.com 2014-2026