Kia Sorento: Fluid Component Location

Oil Pump Component

1. Reaction shaft support assembly 2. Oil pump housing 3. Driven gear 4. Drive gear 5. Oil seal 6. Bush-Housing 7. Reaction shaft 8. Bush- Reaction shaft 9. Sl ...

Fluid Service Adjustment Procedure

Oil level Check    A check of ATF level is not normally required during scheduled services. If an oil leak is ...

See also:

Removal
   Replacing an on/off solenoid valve (SS-A, SS-B) does not require additional hydraulic pressure adjustment; however, the ...

Anti-Pinch Strip Installation
1. Install the tailgate anti-pinch strip. 2. Install the tailgate side trim. 3. Connect the negative (-) batter ...

Relay Box (Passenger Compartment) Removal
1. Disconnect the negative (-) battery terminal. 2. Remove the crash pad lower panel (A). (Refer to Body - "Crash pad") ...