Kia Sorento: ETC (Electronic Throttle Control) System Adjustment
|
•
|
Must perform the Electronic Throttle Control (ETC) learning procedure after replacing or
reinstalling the ETC.
|
|
•
|
If not performing the ETC learning procedure after replacing or re-installing, MIL or DTCs might
occur.
|
|
| 1. |
Wait for 1 minute with the ignition switch ON.
|
| 2. |
Start the engine and hold the idle status for 15 minutes.
|
| 3. |
Waif for 1 minute with the ignition switch OFF.
|
| 4. |
Restart the engine, check that the idle speed is stable.
|
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the air cleaner.
...
Cleaning
1.
Remove the Electronic Throttle Control (ETC).
(Refer to ETC (Electronic Throttle Control) System - "Removal and
I...
ETC (Electronic Throttle Control) System Removal and Installation
ETC (Electronic Throttle Control) System Cleaning
