Kia Sorento: ESC OFF Switch Description

G-Sensor Calibration

1. Ignition "OFF", connect GDS. 2. Ignition "ON" & Engine "OFF" select vehicle name and ESP system. ...

ESC OFF Switch Inspection

1. Turn ignition switch OFF and disconnect the negative (-) battery cable. 2. Remove the crash pad lower panel. (Refer the Body - & ...

See also:

Front Oil Seal Removal and Installation
1. Remove the crankshaft damper pulley. (Refer to Timing System - "Crankshaft Damper Pullty") 2. Remove the front oil seal(A). ...

IPM Trouble Diagnostics When Using GDS
1. The IPM can be diagnosed by using the GDS. The BCM communicates with the GDS which then displays inputs and outputs along with codes. 2. ...

Windshield Wiper-Washer Switch Installation
1. Install the windshield wiper switch. 2. Connect the wiper switch connector. 3. Install the steering column u ...