Kia Sorento: Electric Oil Pump(EOP) Removal and Installation - Hydraulic System - Automatic Transaxle SystemKia Sorento: Electric Oil Pump(EOP) Removal and Installation

Kia Sorento (MQ4, 2021-2026) Service Manual / Automatic Transaxle System / Hydraulic System / Electric Oil Pump(EOP) Removal and Installation

Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under Cover")
3.
Disconnect the EOP connector (A).

Automatic Transaxle System — Hydraulic System / Electric Oil Pump(EOP) / Removal and Installation / Removal illustration

4.
Remove the EOP (A) after removing the bolts.

Tightening torque :
19.6 - 25.5 N·m (2.0 - 2.6 kgf·m, 14.5 - 18.8 lb·ft)

Automatic Transaxle System — Hydraulic System / Electric Oil Pump(EOP) / Removal and Installation / Removal illustration

Installation
1.
Install in the reverse order of removal.
2.
Check the ATF level after refilling the automatic transaxle with fluid.
(Refer to Hydraulic System - "Fluid")
ATF Warmer Removal and Installation
Removal 1. Remove the engine room under cover. (Refer to Engine Mechanical System - "Engine Room Under cover") ...
Fluid Inspection
Inspection Automatic Transaxle Fluid (ATF) Level Check ...
See also:

Maintenance service
You should exercise the utmost care to prevent damage to your vehicle and injury to yourself whenever performing any maintenance or inspection procedures. Should you have any doubts concerning the i ...

CVVT & Camshaft Removal
1. Remove the cylinder head cover. (Refer to Cylinder Head Assembly - "Cylinder Head Cover") 2. Set No.1 cylinder to TDC/comp ...

35R Clutch Control Solenoid Valve(35R/C_VFS)
35R Clutch control solenoid valve(35R/C) is attached to the valve body. This variable force solenoid valve directly controls the hydraulic pressure inside the 35R Clutch. ...

Copyright © www.ksmanual.com 2014-2026 - 0.0507