Kia Sorento: ATF Warmer Removal and Installation
Kia Sorento (MQ4, 2021-2026) Service Manual / Automatic Transaxle System / Hydraulic System / ATF Warmer Removal and Installation
| Removal |
| 1. |
Remove the engine room under cover.
(Refer to Engine Mechanical System - "Engine Room Under
cover")
|
| 2. |
Drain the engine coolant.
(Refer to Engine Mechanical System - "Coolant")
|
| 3. |
Separate the cooling hoses (A) after releasing the clamps.
|
| 4. |
Remove the ATF warmer (A) after removing the bolts.
|
| Installation |
| 1. |
Install in the reverse order of removal.
|
| 2. |
Refill the automatic transaxle with fluid.
(Refer to Hydraulic System - "Fluid")
|
| 3. |
Refill the engine coolant.
(Refer to Engine Mechanical System - "Coolant")
|
| 4. |
After installing, check for leakage of fluid from hose connection during engine starting and running.
|
...
Hydraulic System
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the engine room under cove...
Electric Oil Pump(EOP) Removal and Installation
See also:
Troubleshooting
Symptom
Possible cause
Remedy
Speedometer does not operate
Cluster fuse (10A) blown
Check for short and replace fuse
Speedometer faulty
...
Electric Oil Pump(EOP) Removal and Installation
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the eng ...
Steering Column and Shaft Inspection
1.
Check the steering column for damage and deformation.
2.
Check the joint bearing for damage and wear.
3.
Che ...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.0639