Kia Sorento: Cylinder Head Disassembly - Cylinder Head Assembly - Engine Mechanical System - Kia Sorento XM 2011-2023 Service ManualKia Sorento: Cylinder Head Disassembly

Second Generation XM (2011-2023) / Kia Sorento XM 2011-2023 Service Manual / Engine Mechanical System / Cylinder Head Assembly / Cylinder Head Disassembly

  
Identify MLA(Mechanical Lash Adjuster), valves, valve springs as they are removed so that each item can be reinstalled in its original position.
1.
Remove the MLAs (A).

2.
Remove the valves.
(1)
Using SST (09222-3K000, 09222-3K100), compress the valve spring and remove retainer lock.

(2)
Remove the spring retainer.
(3)
Remove the valve spring.
(4)
Remove the valve.
(5)
Using needle-nose pliers, remove the valve stem seal.
  
Do not reuse old valve stem seals.
Cylinder Head Removal
   • Use fender covers to avoid damaging painted surfaces. • ...

Cylinder Head Inspection
Cylinder Head 1. Inspect for flatness. Using a precision straight edge and feeler gauge, measure the surface the contacting the cylinder block and the manifolds fo ...

See also:

Lane Departure Warning System (LDWS) Unit Installation
1. Install the LDWS unit. 2. Install the LDWS unit cover. 3. Check LDWS system operation. ...

Seat Belt Pretensioner (BPT) Installation
1. Remove the ignition key from the vehicle. 2. Disconnect the battery negative cable and wait for at least thirty seconds. ...

Rear Disc Brake Replacement
1. Remove the rear wheel & tire. 2. Loosen the guide rod bolt (B) and pivot the caliper (A) up out of the way. ...

Copyright © www.ksmanual.com 2014-2023