Never attempt to measure the circuit resistance of the airbag
module even if you are using the specified tester. If the circuit resistance
is measured with a tester, accidental airbag deployment will result
in serious personal injury.
|
Cargo Lamp Installation
1.
Replace the lamp bulb.
2.
Install the cargo lamp assembly after connecting the lamp connector.
...
Valve Clearance Inspection And Adjustment
Inspect and adjust the valve clearance when the engine is cold (Engine
coolant temperature : 20°C (68°F)) and cylinder ...
Hazard Lamp Switch Installation
1.
Install the heater control unit to the center fascia panel.
2.
Install the center fascia panel.
...