Kia Sorento: Crash Pad Center Panel Repair Procedures - Crash Pad - Body (Interior and Exterior)Kia Sorento: Crash Pad Center Panel Repair Procedures

Kia Sorento (MQ4, 2021-2026) Service Manual / Body (Interior and Exterior) / Crash Pad / Crash Pad Center Panel Repair Procedures

Removal
1.
Remove the floor console assembly.
(Refer to Floor Console - "Floor Console Assembly")
2.
Remove the crash pad under cover.
(Refer to Crash Pad - "Crash Pad Under Cover")
3.
Remove the glove box.
(Refer to Crash Pad - "Glove Box")
4.
Remove the crash pad lower panel.
(Refer to Crash Pad - "Crash Pad Lower Panel")
5.
Remove the crash pad center garnish [Passenger's Side].
(Refer to Crash Pad - "Crash Pad Garnish")
6.
Remove the heater and air conditioner controller.
(Refer to Heating, Ventilation And Air Conditioning - "Heater and Air Conditioning Controller")
7.
Remove the crash pad center panel (A) after removing the screws and bolts.

Tightening torque :
7.8 - 11.8 N·m (0.8 - 1.2 kgf·m, 5.8 - 8.7 lb·ft)

Body (Interior and Exterior) — Crash Pad / Crash Pad Center Panel / Repair Procedures / Removal illustration

Body (Interior and Exterior) — Crash Pad / Crash Pad Center Panel / Repair Procedures / Removal illustration

Information
Clip position :

Body (Interior and Exterior) — Crash Pad / Crash Pad Center Panel / Repair Procedures / Removal illustration

8.
Disconnect the each connector (A).

Body (Interior and Exterior) — Crash Pad / Crash Pad Center Panel / Repair Procedures / Removal illustration

Installation
1.
Install in the reverse order of removal.
Crash Pad Under Cover Repair Procedures
Removal 1. Remove the crash pad under cover (A). Installation ...
Main Crash Pad Assembly Repair Procedures
Removal 1. Recover refrigerant by using the refrigerant recovery/recycling/charging machine. (Refer to Air conditioning System - "Refriger...
See also:

Front Disc Brake Components
1. Guide rod bolt 2. Bleed screw 3. Caliper carrier 4. Caliper body 5. Inner pad shim 6. Brake pad 7. Pad retainer ...

Diagnosis With GDS
1. BSD system defects can be quickly diagnosed with the GDS. GDS operates actuator quickly to monitor, input/output value and self diagnosis. 2. ...

Single-Use Parts
Single-Use Parts Non-reusable parts (Single-Use Parts) Workshop manual provides “Components and Components Location” which can be used to identify “Non-reusable ...

Copyright © www.ksmanual.com 2014-2026 - 0.0534