Kia Sorento: Clock Spring Description and Operation. Clock Spring Troubleshooting

Kia Sorento (MQ4, 2021-2026) Service Manual / Restraint / Airbag Module / Clock Spring Description and Operation. Clock Spring Troubleshooting

Clock Spring Description and Operation

Description

The clock spring is a device that transmits the operation signal generated from the sensors installed on the front and side of the vehicle to the inflator (gas generator) of the airbag via the internal cable. It also transmits the steering wheel remote control switch and horn operation signals to the system via the internal cable.

If the airbag is deployed due to an accident, the clock spring cannot be repaired or reused because there is a possibility of damage to the clock spring due to heat and impact caused by the explosion of the airbag inflator (gas generating device). Be sure to replace with a new one.

Clock Spring Troubleshooting

Troubleshooting

Airbag warning lamp on

The Clock Spring Repair Procedure

Noise

The Clock Spring Repair Procedure

Curtain Airbag (CAB) Removal and Installation

Removal 1. Disconnect the battery negative ( - ) terminal. ...

Clock Spring Removal

Removal 1. Remove the steering wheel. (Refer to Steering System - "Steering Wheel") 2. ...

See also:

Emergency Fastening Device (EFD) Description
Emergency Fastening Device (EFD) operates as well as Belt Pretensioner at the same time If it gets into its deploy condition after a collision. It is located at near anchor on driver and pass ...

Power Window Switch Inspection
Main Power Window Switch Inspection 1. Disconnect the negative (-) battery terminal. 2. Remove the front door trim and power window switch. ...

Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications. Torque Converter Control Solenoid Valve (T/CON_VFS) Components and Components Location
Torque Converter Control Solenoid Valve (T/CON_VFS) Specifications Specification Item Specification Control type N/L ...

Manuals list

Copyright © www.ksmanual.com 2014-2026 - 0.0555