1. |
Disconnect the stopper (B) from the glove box (A).
|
2. |
Disconnect the air damper (A) from the glove box (B).
|
3. |
Remove the filter cover (A) by pressing the knob.
|
4. |
Replace the air filter (B) with a new one according to the direction
of air filter.
|
Ignition Coil Specification
Item
Specification
Primary Coil Resistance (Ω)
0.62 ± 10% [20°C (68°F)]
Secondary Coil Resistance (kΩ)
7.0 ± 15% [20 ...
Battery Sensor Installation
1.
Install in the reverse order of removal.
Battery sensor cable installation
bolt:
10.8 ~ 13.7 N.m (1.1 ~ 1.4 kgf.m, 8.0 ~ 10.1 lb ...
Water pump Components
1. Water pump pulley
2. Water pump
3. Water pump gasket
4. Water pump housing
5. Water pump housing gasket
6. O-ring
7. Water inlet pipe
...