Kia Sorento: Basic Service Symbols
There are five primary symbols used to complement illustrations. These symbols indicate the part to apply such materials during service.
| Symbol |
Meaning |
|
|
Do not reuse the part. Replace a new one. |
|
|
Apply engine oil or transmission oil to the part. |
|
|
Apply automatic transmission fluid (ATF) to the part. |
|
|
Apply grease to the part. |
|
|
Apply sealant to the part. |
Towing
If the vehicle needs to be towed, call a professional towing service. Never tow
vehicle with just a rope or chain. It is very dangerous.[Front]
[Rear]
Emergency Towing
There are three popul ...
General Service Information
Protection Of The VehicleAlways be sure to cover fenders, seats, and floor areas
before starting work.
The support rod must be ...
See also:
Output Speed Sensor Inspection
1.
Check signal waveform of Input & output speed sensor using the
GDS.
Specification :
Refer to "Signal Wave Form" section.
...
Engine Control Module (ECM) Installation
1.
Install in the reverse order of removal.
ECM installation bolt:
9.8 ~ 11.8 N.m (1.0 ~ 1.2 kgf.m,7.2 ~ 8.7 lb-ft)
ECM ...
Front Driveshaft Removal and Installation
1.
Remove the front wheel and tire (A) from front hub .
Tightening torque:
88.2 ~ 107.8 N.m (9.0 ~ 11.0 kgf.m, 65.0 ~ 79.5 lb-ft)
...
Categories
- Home
- First Generation
- Second Generation
- Kia Sorento XM 2011-2026 Owners Manual
- Kia Sorento XM 2011-2026 Service Manual
