Kia Sorento: Air Flow Sensor (AFS) Specifications. Air Flow Sensor (AFS) Description and Operation
Kia Sorento (MQ4, 2021-2026) Service Manual / Engine Control / Fuel System / Engine Control System / Air Flow Sensor (AFS) Specifications. Air Flow Sensor (AFS) Description and Operation
Air Flow Sensor (AFS) Specifications
| Specification |
|
Item |
Specification |
|
Operating Voltage (V) |
4.85 - 5.15 |
|
Consumption Current (mA) |
Maximum 30 |
Air Flow Sensor (AFS) Description and Operation
| Description |
| • |
Air Flow Sensor (AFS) measures the mass of intake air entering the engine, and send the signal to Engine
Control Module (ECM).
|
| • |
A large amount of intake air represents acceleration or high load conditions while a small amount of intake
air represents deceleration or idle.
|
| • |
The ECM uses this information to control the Exhaust Gas Recirculation (EGR) valve and correct the fuel
amount.
|
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Remove the accelerator pedal modul...
Accelerator Position Sensor (APS) Removal and Installation
Removal
1.
Disconnect the battery negative ( - ) terminal.
2.
Disconnect the Air Flow Sensor (AF...
Air Flow Sensor (AFS) Removal and Installation
See also:
Emergency Fastening Device (EFD) Installation
1.
Remove the ignition key from the vehicle.
2.
Disconnect the negative (-) cable from battery and wait for at
least thirty seconds.
...
Rear Hub - Carrier Repair procedures
Removal
[2WD]
1.
Disconnect the (-) battery terminal.
2.
Remove the rear whee ...
Lubricants
Item
Specified lubricant
Quantity
Transaxle fluid
ATF SP-Ⅳ or equivalent
7.8 L
(2.06 U.S gal.,8.24 U.S.qt., 6.86 Imp.qt.)
...
Manuals list
- Kia Sorento MQ4 2021-2026 Owners Manual
- Kia Sorento XM 2011-2015 Owners Manual
- Kia Sorento XM 2011-2015 Service Manual
Copyright © www.ksmanual.com 2014-2026 - 0.07